Acer Veriton M6650g vs. HP ProDesk 400 G6 SFF

Comparison and Differences

Acer_Veriton_M6650g.jpg case front and back pannelHP_ProDesk_400_G6_SFF.jpg case front and back pannel
Model
Form factorMini TowerSmall
CPU optionsIntel Gen7 i3/i5/i7; Pentium; CeleronIntel Gen8&9 i3/i5/i7; Celeron; Pentium;
ChipsetQ270B360
Dedicated GPU *GeForce GTX 1650 SuperGeForce GT 1030 Low Profile
RAMUDIMM DDR4-2400DIMM DDR4-2666
RAM slots42
RAM speed2400 MT/s2666 MT/s
RAM max64 GB64 GB
USB ports(4x) USB-A 3.0; (4x) USB-A 2.0; USB-A 3.1; USB-C 3.1(4x)USB-A 3.0; (4x)USB-A 2.0;
Video ports(2x) DisplayPort 1.2; HDMI; VGADisplayPort; VGA;
Other portsRJ45; (2x) Mic, Speaker; Line in; Line out; PS/2 portsRJ45; Headset; Line-In; Line-Out;
Optional portsSerial; Parallel: Card readerSD card reader; Serial; Serial and (2x) PS2; DP/HDMI/VGA/USB-C;
SATA ports52
PCI slotsPCIe 3.0 x16; PCIe 2.0 x1; PCI; PCIe 3.0 x16 (wired x4)PCIe 3.0 x16; PCIe 3.0 x1 ;
M.2 slotsM.2 2230 (WiFi/BT)M.2 2280/2230 M-key (PCIe x4); M.2 2230 (WiFi/BT)
Drive bays(5x) 2.5/3.5in; 5.25 inch(2x) 2.5/3.5in; 5.25in (slim);
PSU300/500 W180 W
Weight9.00 kg (19.84 lb)4.6 kg (10.14 lb)
Released20182019
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Acer Veriton M6650g and HP ProDesk 400 G6 SFF

If you are looking for a more modern desktop, then you should go with the HP ProDesk 400 G6 SFF which was released in 2019. The Acer Veriton M6650g is older and entered production in 2018.

If you are looking for the smaller form factor the HP ProDesk 400 G6 SFF is the right one for you. It is smaller than the Acer Veriton M6650g and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the HP ProDesk 400 G6 SFF as it is running a newer generation CPU. This is not to say that Acer Veriton M6650g is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Acer Veriton M6650g has 4 RAM slots while the HP ProDesk 400 G6 SFF has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The HP ProDesk 400 G6 SFF is using the faster 2666 MT/s RAM. The Acer Veriton M6650g is slower by supporting RAM speeds of up to 2400 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 64 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

In total the Acer Veriton M6650g has 10 USB ports. The HP ProDesk 400 G6 SFF is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Acer Veriton M6650g, is that it has 2 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the HP ProDesk 400 G6 SFF has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Acer Veriton M6650g comes with 2 ports, while the HP ProDesk 400 G6 SFF has only 1. If you are planning to use multiple monitors, the Acer Veriton M6650g is the better choice.

The Acer Veriton M6650g comes with an HDMI port, while the HP ProDesk 400 G6 SFF does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Acer Veriton M6650g is better equipped as it comes with 5 SATA slot(s), while the HP ProDesk 400 G6 SFF has 2 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the HP ProDesk 400 G6 SFF. Sadly, the Acer Veriton M6650g has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 400 G6 SFF comes with a decent 180 Watt PSU, but the Acer Veriton M6650g has a more powerful one rated at 500 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Acer_Veriton_M6650g_motherboard.jpg motherboard layoutHP_ProDesk_400_G6_SFF_motherboard.jpg motherboard layout