Acer Veriton S2670g vs. HP ProDesk 490 G1 Microtower

Comparison and Differences

Acer_Veriton_S2670g.jpg case front and back pannel

HP_ProDesk_490_G1_Microtower.jpg case front and back pannel

Model
Form factor	Mini Tower	Mini Tower
CPU options	Intel Gen10 i3/i5/i7	Intel Gen4 i3/i5/i7; Celeron; Pentium;
Chipset	B460	H81
Dedicated GPU *	GeForce GTX 1650 Super	GeForce GTX 1660 Super
RAM	UDIMM DDR4-2666	DIMM DDR3-1600
RAM slots	2	4
RAM speed	2666 MT/s	1600 MT/s
RAM max	32 GB	32 GB
USB ports	(6x) USB-A 3.0; (2x) USB-A 2.0;	(4x)USB-A 3.0; (6x)USB-A 2.0;
Video ports	HDMI 1.4; DisplayPort 1.4	DVI-D; VGA;
Other ports	RJ45; (2x) Mic, Speaker; Line in; Line out; PS/2 ports; Serial	RJ45; Hdph; Mic; Line-Out; Line-In; Serial; (2x) PS2;
Optional ports	Card reader	SD card reader; DisplayPort 1.2; Serial; Parallel;
SATA ports	4	4
PCI slots	PCIe 3.0 x16; (2x) PCIe 3.0 x1; PCI	PCIe x16; (3x) PCIe x1;
M.2 slots	M.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT)	N.A.
Drive bays	(2x) 3.5in; 5.25 inch slim	(3x) 3.5in; (2x) 5.25in
PSU	180/300 W	300 W
Weight	6.84 kg (15.07 lb)	7.1 kg (15.7 lb)
Released	2020	2013
Manual	link	link
Price**	Check Price	Check Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Acer Veriton S2670g and HP ProDesk 490 G1 Microtower

If you are looking for a more modern desktop, then you should go with the Acer Veriton S2670g which was released in 2020. The HP ProDesk 490 G1 Microtower is older and entered production in 2013.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Acer Veriton S2670g as it is running a newer generation CPU. This is not to say that HP ProDesk 490 G1 Microtower is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The HP ProDesk 490 G1 Microtower has 4 RAM slots while the Acer Veriton S2670g has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Acer Veriton S2670g is using the faster 2666 MT/s RAM. The HP ProDesk 490 G1 Microtower is slower by supporting RAM speeds of up to 1600 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 32 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

In total the HP ProDesk 490 G1 Microtower has 10 USB ports. The Acer Veriton S2670g is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

Unfortunately, only the Acer Veriton S2670g has a DisplayPort. The HP ProDesk 490 G1 Microtower does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of conversion types.

The Acer Veriton S2670g comes with an HDMI port, while the HP ProDesk 490 G1 Microtower does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA slots are located on the motherboard and it is where SSD, HDD and Optical Disk Drives are connected. Each of the two models being compared have 4 SATA slot(s). Keep in mind that having too few SATA slots might limit your options for connecting additional memory drives.

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the Acer Veriton S2670g. Sadly, the HP ProDesk 490 G1 Microtower has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Looking at the Power Supply Unit (PSU) of the two models we don't see any differences. For either of them you get a maximum power of 300 Watts. However be careful, many models have more than one power supply option. When buying your computer, it is a good idea to get a version with the most powerful PSU. This will potentially allow you to upgrade to a more powerful GPU for example.