Alienware Aurora R11 vs. Dell OptiPlex SFF 7010 2023

Comparison and Differences

Alienware_Aurora_R11.jpg case front and back pannelDell_OptiPlex_SFF_7010_2023.jpg case front and back pannel
Model
Form factorMid TowerSmall
CPU optionsIntel Gen10 i3/i5/i7/i9;Intel Gen 12&13 i3/i5; Celeron; Pentium
ChipsetZ490Q670
Dedicated GPU *GeForce RTX 3090AMD Radeon RX 6400 Low Profile
RAMDIMM DDR4-2933/3400DIMM DDR4-3200
RAM slots42
RAM speed3400 MT/s3200 MT/s
RAM max128 GB64 GB
USB ports(6x) USB 3.0 Type A; USB 3.0 Type C; (6x) USB-A 2.0; USB 3.1 Type C; USB 3.1 Type A;(4x) USB-A 2.0; (4x) USB-A 3.0;
Video portsN/ADisplay Port 1.4a; HDMI 1.4b;
Other portsRJ45; Headset; Line-Out; Line-In; S/PDFI optical/analog; Front, side, center, rare outputs;RJ45(2.5GHz); Audio
Optional portsDisplayPortHDMI 2.0b/Displayport/VGA;
SATA ports42
PCI slots(x2) PCIe 3.0 x16; (x2) PCIe 3.0 x4;PCIe 3.0 x16; PCIe 3.0 x1;
M.2 slotsM.2 2280/2260/2242 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT); M.2 2230/2280 (PCIe 4.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays(2x) 2.5in; 3.25in; U.23.5in; 2.5in;
PSU550/1000 W180/300 W
Weight17.80 kg (39.24 lb)4.87 kg (10.72 lb)
Released20202023
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Alienware Aurora R11 and Dell OptiPlex SFF 7010 2023

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex SFF 7010 2023 which was released in 2023. The Alienware Aurora R11 is older and entered production in 2020.

If you are looking for the smaller form factor the Dell OptiPlex SFF 7010 2023 is the right one for you. It is smaller than the Alienware Aurora R11 and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex SFF 7010 2023 as it is running a newer generation CPU. This is not to say that Alienware Aurora R11 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Alienware Aurora R11 has 4 RAM slots while the Dell OptiPlex SFF 7010 2023 has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Alienware Aurora R11 is using the faster 3400 MT/s RAM. The Dell OptiPlex SFF 7010 2023 is slower by supporting RAM speeds of up to 3200 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Alienware Aurora R11 as it has the ability to run 128 GB of RAM. The Dell OptiPlex SFF 7010 2023 can do a bit less at max 64 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Alienware Aurora R11 has 15 USB ports. The Dell OptiPlex SFF 7010 2023 is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Alienware Aurora R11, is that it has 3 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Dell OptiPlex SFF 7010 2023 has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

Unfortunately, only the Dell OptiPlex SFF 7010 2023 has a DisplayPort. The Alienware Aurora R11 does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of conversion types.

The Dell OptiPlex SFF 7010 2023 comes with an HDMI port, while the Alienware Aurora R11 does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Alienware Aurora R11 is better equipped as it comes with 4 SATA slot(s), while the Dell OptiPlex SFF 7010 2023 has 2 slot(s).

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex SFF 7010 2023 comes with a decent 300 Watt PSU, but the Alienware Aurora R11 has a more powerful one rated at 1000 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Alienware_Aurora_R11_motherboard.jpg motherboard layoutDell_OptiPlex_SFF_7010_2023_motherboard.jpg motherboard layout