Acer Veriton N4670g vs. Dell OptiPlex 3060 SFF

Comparison and Differences

Acer_Veriton_N4670g.jpg case front and back pannelDell_OptiPlex_3060_SFF.jpg case front and back pannel
Model
Form factorMicroSmall
CPU optionsIntel Gen9&10 i3/i5/i7Intel Gen8 i3/i5/i7; Pentium; Celeron;
ChipsetH470H370
Dedicated GPU *N.A.GeForce GT 1030 Low Profile
RAMSODIMM DDR4-2933DIMM DDR4-2400/2666
RAM slots22
RAM speed2933 MT/s2666 MT/s
RAM max32 GB32 GB
USB ports(4x) USB-A 3.0; USB-A 2.0; USB-A 3.1; USB-C 3.1(4x) USB-A 3.0; (4x) USB-A 2.0;
Video portsHDMI 1.4; DisplayPort 1.4Display Port 1.2; HDMI 1.4;
Other portsRJ45; (3x) Headset; Mic; RJ45; Headset; Line-Out;
Optional portsN.ASerial+PS2; DP1.2/HDMI2.0b/VGA; Media Card Reader; WiFi antenna;
SATA ports12
PCI slotsN.A.PCIe 3.0 x16; PCIe x1;
M.2 slots(2x) M.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT)M.2 2280/2230 M-key (PCIe 2.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays2.5in3.5in/(2x)2.5in; 5.25in (slim);
PSU65/90 W200 W
Weight1.63kg (3.31 lb)5.26 kg (11.57 lb)
Released20202018
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Acer Veriton N4670g and Dell OptiPlex 3060 SFF

If you are looking for a more modern desktop, then you should go with the Acer Veriton N4670g which was released in 2020. The Dell OptiPlex 3060 SFF is older and entered production in 2018.

If you are looking for the smaller form factor the Acer Veriton N4670g is the right one for you. It is smaller than the Dell OptiPlex 3060 SFF and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Acer Veriton N4670g as it is running a newer generation CPU. This is not to say that Dell OptiPlex 3060 SFF is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (2 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Acer Veriton N4670g is using the faster 2933 MT/s RAM. The Dell OptiPlex 3060 SFF is slower by supporting RAM speeds of up to 2666 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 32 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

In total the Dell OptiPlex 3060 SFF has 8 USB ports. The Acer Veriton N4670g is inferior in this regard and packs 7 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Acer Veriton N4670g, is that it has 2 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Dell OptiPlex 3060 SFF has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

In case your monitor supports HDMI only, you will be happy to hear that both models come with an HDMI port.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell OptiPlex 3060 SFF is better equipped as it comes with 2 SATA slot(s), while the Acer Veriton N4670g has 1 slot(s).

An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the Acer Veriton N4670g has 1 M.2 slots while the Dell OptiPlex 3060 SFF comes with just 1.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Acer Veriton N4670g comes with a decent 90 Watt PSU, but the Dell OptiPlex 3060 SFF has a more powerful one rated at 200 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Acer_Veriton_N4670g_motherboard.jpg motherboard layoutDell_OptiPlex_3060_SFF_motherboard.jpg motherboard layout