Dell OptiPlex 3090 SFF vs. HP ProDesk 600 G4 SFF

Comparison and Differences

Dell_OptiPlex_3090_SFF.jpg case front and back pannel

HP_ProDesk_600_G4_SFF.jpg case front and back pannel

Model
Form factor	Small	Small
CPU options	Intel Gen 10 i3/i5/i7/i9; Pentium	Intel Gen8 i3/i5/i7; Celeron; Pentium;
Chipset	Q470	Q370
Dedicated GPU *	AMD Radeon RX 6400 Low Profile	GeForce GT 1030 Low Profile
RAM	DIMM DDR4-2666	DIMM DDR4-2666
RAM slots	2	4
RAM speed	2666 MT/s	2666 MT/s
RAM max	64 GB	64 GB
USB ports	(4x) USB-A 2.0; (4x) USB-A 3.0;	USB-C 3.1; (4x)USB-A 3.1; (2x)USB-A 3.0; (4x)USB-A 2.0;
Video ports	Display Port 1.4a; HDMI 1.4b;	(2x) DisplayPort:
Other ports	RJ45; Audio; Line-Out/In;	RJ45; Headset; Line-Out; Line-In;
Optional ports	HDMI 2.0b/Displayport/VGA;	DP1.2/HDMI2.0/VGA/USB-C(DP); Serial; SD card reader;
SATA ports	2	3
PCI slots	PCIe 3.0 x16; (2x) PCIe 3.0 x1;	PCIe 3.0 x16; PCIe x4 (open ended);
M.2 slots	M.2 2230/2280 (PCIe 4.0 x4, NVMe); M.2 2230 (WiFi/BT)	M.2 2280/2230 M-key (PCIe x4); M.2 2230 (WiFi/BT);
Drive bays	3.5in; 2.5in; 5.25in (slim);	(2x)2.5in/3.5in; 5.25in (slim);
PSU	200 W	180 W
Weight	5.10 kg (11.25 lb)	4.54 kg (10.01 lb)
Released	2021	2018
Manual	link	link
Price**	Check Price	Check Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 3090 SFF and HP ProDesk 600 G4 SFF

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 3090 SFF which was released in 2021. The HP ProDesk 600 G4 SFF is older and entered production in 2018.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 3090 SFF as it is running a newer generation CPU. This is not to say that HP ProDesk 600 G4 SFF is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The HP ProDesk 600 G4 SFF has 4 RAM slots while the Dell OptiPlex 3090 SFF has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

None of the desktops has an advantage when it comes to the speed of the RAM being used. Both models support RAM speeds of up to 2666. In addition, you will be able to install the same amount of RAM in both models, and most probably 64 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

In total the HP ProDesk 600 G4 SFF has 11 USB ports. The Dell OptiPlex 3090 SFF is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the HP ProDesk 600 G4 SFF, is that it has 5 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Dell OptiPlex 3090 SFF has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the HP ProDesk 600 G4 SFF is better equipped as it comes with 3 SATA slot(s), while the Dell OptiPlex 3090 SFF has 2 slot(s).

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 600 G4 SFF comes with a decent 180 Watt PSU, but the Dell OptiPlex 3090 SFF has a more powerful one rated at 200 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.