Dell OptiPlex 5040 MT vs. Fujitsu Esprimo D7010 8

Comparison and Differences

Dell_OptiPlex_5040_MT.jpg case front and back pannelFujitsu_Esprimo_D7010_8.jpg case front and back pannel
Model
Form factorMini TowerSmall
CPU optionsIntel Gen6 i3/i5/i7Intel Gen10 i3/i5/i7/i9
ChipsetQ170B460
Dedicated GPU *GeForce GTX 1650 SuperRadeon RX 6400 Low Profile
RAMDIMM DDR3L-1600 UDIMM DDR4-2933
RAM slots44
RAM speed1600 MT/s2933 MT/s
RAM max16 GB128 GB
USB ports(6x) USB-A 3.0; (4x) USB-A 2.0; (4x) USB-A 3.0; (4x) USB-A 2.0
Video ports(2x) Display Port 1.2; HDMI 1.4;(2x) DisplayPort 1.2
Other portsSerial; (2x) PS2; RJ45; Headset; Line-Out; RJ45; Headset, Line in; Line out
Optional portsVGA; Media Card Reader;PS/2; VGA
SATA ports43
PCI slotsPCIe 3.0 x16; PCIe 3.0 x16 (wired x4); PCIe 3.0 x1; PCI; PCIe 3.0 x16 (wired x4)
M.2 slotsM.2 2280 M-key (PCIe 3.0 x4, NVMe) M.2 2280/2230 M-key (PCIe 3.0 x4, NVMe)
Drive bays3.5in/5.25in; (2x) 2.5in; 5.25in (slim);3.5in; 2.5in; 5.25 inch slim
PSU240 W280/300 W
Weight8.00 kg (17.64 lb)8.00 kg (17.64 lb)
Released20152020
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 5040 MT and Fujitsu Esprimo D7010 8

If you are looking for a more modern desktop, then you should go with the Fujitsu Esprimo D7010 8 which was released in 2020. The Dell OptiPlex 5040 MT is older and entered production in 2015.

If you are looking for the smaller form factor the Fujitsu Esprimo D7010 8 is the right one for you. It is smaller than the Dell OptiPlex 5040 MT and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Fujitsu Esprimo D7010 8 as it is running a newer generation CPU. This is not to say that Dell OptiPlex 5040 MT is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (4 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Fujitsu Esprimo D7010 8 is using the faster 2933 MT/s RAM. The Dell OptiPlex 5040 MT is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Fujitsu Esprimo D7010 8 as it has the ability to run 128 GB of RAM. The Dell OptiPlex 5040 MT can do a bit less at max 16 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Dell OptiPlex 5040 MT has 10 USB ports. The Fujitsu Esprimo D7010 8 is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

The Dell OptiPlex 5040 MT comes with an HDMI port, while the Fujitsu Esprimo D7010 8 does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell OptiPlex 5040 MT is better equipped as it comes with 4 SATA slot(s), while the Fujitsu Esprimo D7010 8 has 3 slot(s).

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 5040 MT comes with a decent 240 Watt PSU, but the Fujitsu Esprimo D7010 8 has a more powerful one rated at 300 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_5040_MT_motherboard.jpg motherboard layoutFujitsu_Esprimo_D7010_8_motherboard.jpg motherboard layout