Acer Veriton X4670g vs. Dell OptiPlex 7000 Tower
Comparison and Differences
Differences between Acer Veriton X4670g and Dell OptiPlex 7000 Tower
If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 7000 Tower which was released in 2022. The Acer Veriton X4670g is older and entered production in 2020.
If you are looking for the smaller form factor the Acer Veriton X4670g is the right one for you. It is smaller than the Dell OptiPlex 7000 Tower and will fit more easily under your desk.
Processor
Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 7000 Tower as it is running a newer generation CPU. This is not to say that Acer Veriton X4670g is bad - it can still run some powerful CPUs, albeit being an older generation.
Memory
The Dell OptiPlex 7000 Tower has 4 RAM slots while the Acer Veriton X4670g has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.
The Dell OptiPlex 7000 Tower is using the faster 4400 MT/s RAM. The Acer Veriton X4670g is slower by supporting RAM speeds of up to 2933 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex 7000 Tower as it has the ability to run 128 GB of RAM. The Acer Veriton X4670g can do a bit less at max 64 GB. Most of the times, this should be sufficient for the majority of users.
Ports
In total the Dell OptiPlex 7000 Tower has 10 USB ports. The Acer Veriton X4670g is inferior in this regard and packs 9 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. It's great that both of the models have USB 3.1 ports which will allow you to exchange data with your peripherals at up to 10Gb/s. But if you need maximum connectivity, go with the Acer Veriton X4670g as it has 5 USB3.1 ports (the Dell OptiPlex 7000 Tower has 2).
DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Dell OptiPlex 7000 Tower comes with 3 ports, while the Acer Veriton X4670g has only 2. If you are planning to use multiple monitors, the Dell OptiPlex 7000 Tower is the better choice.
None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.
SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell OptiPlex 7000 Tower is better equipped as it comes with 4 SATA slot(s), while the Acer Veriton X4670g has 3 slot(s).
An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the Dell OptiPlex 7000 Tower has 1 M.2 slots while the Acer Veriton X4670g comes with just 1.
Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!
Power Supply
Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Acer Veriton X4670g comes with a decent 300 Watt PSU, but the Dell OptiPlex 7000 Tower has a more powerful one rated at 500 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.
Motherboard
