Dell G5 5090 vs. Dell OptiPlex 7090 MT

Comparison and Differences

Dell_G5_5090.jpg case front and back pannelDell_OptiPlex_7090_MT.jpg case front and back pannel
Model
Form factorMini TowerMini Tower
CPU optionsIntel Gen9 i3/i5/i7/i9;Intel Gen10&11 i3/i5/i7/i9;
ChipsetH370Q570
Dedicated GPU *GeForce RTX 2080GeForce RTX 3070 (OEM)
RAMDIMM DDR4-2666DIMM DDR4-2666/2933/3200
RAM slots44
RAM speed2666 MT/s3200 MT/s
RAM max64 GB128 GB
USB ports(5x) USB 3.0 Type A; (4x) USB-A 2.0; USB 3.0 Type C;USB 3.2 Type C; USB 3.1 Type C; (2x) USB-A 3.1; USB-A 3.0; (x4) USB-A 2.0;
Video portsN/A(4x) Display Port 1.4; (x3) HDMI 2.0b; VGA;
Other portsRJ45; Headset; Mic; Line-Out; Front, side, center, rare outputs;RJ45; Audio; Line-Out/In; Serial; (x2) PS2
Optional portsN.A.USB Type-C (DP Alt Mode); Media Card Reader;
SATA ports34
PCI slotsPCIe 3.0 x16; PCIe 3.0 x4; PCIe 3.0 x1;PCIe 4.0 x16; PCIe 3.0 x4; PCIe 3.0 x1; PCIe-32
M.2 slotsM.2 2230 (WiFi/BT); M.2 2230/2280 M-key (PCIe 3.0 x4, NVMe);M.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 M-key (PCIe); M.2 2230 (WiFi/BT)
Drive bays(2x) 2.5in; 3.25in;(x2) 3.5in; (2x) 2.5in; 5.25in (slim);
PSU360/460 W260/300/369/500 W
Weight8.20 kg (18.07 lbs)10.22 kg (22.53 lb)
Released20192021
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell G5 5090 and Dell OptiPlex 7090 MT

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 7090 MT which was released in 2021. The Dell G5 5090 is older and entered production in 2019.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 7090 MT as it is running a newer generation CPU. This is not to say that Dell G5 5090 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (4 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Dell OptiPlex 7090 MT is using the faster 3200 MT/s RAM. The Dell G5 5090 is slower by supporting RAM speeds of up to 2666 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex 7090 MT as it has the ability to run 128 GB of RAM. The Dell G5 5090 can do a bit less at max 64 GB. Most of the times, this should be sufficient for the majority of users.

Ports

Both models have the same amount of USB ports for total count of 9. If this is not enough, using a USB hub is always a viable option. It's great that both of the models have USB 3.1 ports which will allow you to exchange data with your peripherals at up to 10Gb/s. But if you need maximum connectivity, go with the Dell OptiPlex 7090 MT as it has 3 USB3.1 ports (the Dell G5 5090 has 2).

Unfortunately, only the Dell OptiPlex 7090 MT has a DisplayPort. The Dell G5 5090 does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of conversion types.

The Dell OptiPlex 7090 MT comes with an HDMI port, while the Dell G5 5090 does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell OptiPlex 7090 MT is better equipped as it comes with 4 SATA slot(s), while the Dell G5 5090 has 3 slot(s).

An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the Dell OptiPlex 7090 MT has 1 M.2 slots while the Dell G5 5090 comes with just 1.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell G5 5090 comes with a decent 460 Watt PSU, but the Dell OptiPlex 7090 MT has a more powerful one rated at 500 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_G5_5090_motherboard.jpg motherboard layoutDell_OptiPlex_7090_MT_motherboard.jpg motherboard layout