Dell OptiPlex 7090 SFF vs. Fujitsu Esprimo P520

Comparison and Differences

Dell_OptiPlex_7090_SFF.jpg case front and back pannelFujitsu_Esprimo_P520.jpg case front and back pannel
Model
Form factorSmallMini Tower
CPU optionsIntel Gen10&11 i3/i5/i7/i9;Intel Gen4 i3/i5/i7; Pentium; Celeron
ChipsetQ570B85
Dedicated GPU *AMD Radeon RX 6400 Low ProfileGeForce GTX 1650 Super
RAMDIMM DDR4-2666/2933/3200UDIMM DDR3-1600
RAM slots44
RAM speed3200 MT/s1600 MT/s
RAM max128 GB32 GB
USB portsUSB 3.2 Type C; USB 3.1 Type C; (2x) USB-A 3.1; USB-A 3.0; (x4) USB-A 2.0;(2x) USB-A 3.0; (6x) USB-A 2.0
Video ports(3x) Display Port 1.4; HDMI 2.0b;DVI; VGA
Other portsRJ45; Audio; Line-Out/In; Serial; (x2) PS2RJ45; Headphones; (2x) Mic; Line in; Line out; PS/2; Serial
Optional portsUSB Type-C (DP Alt Mode); Media Card Reader;Parallel; eSATA; DisplayPort
SATA ports34
PCI slotsPCIe 4.0 x16; PCIe 3.0 x4;PCIe 3.0 x16; (2x) PCIe 2.0 x1; PCIe 2.0 x16 (wired x4)
M.2 slotsM.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 M-key (PCIe); M.2 2230 (WiFi/BT) N.A.
Drive bays(x2) 3.5in; (2x) 2.5in; 5.25in (slim);(3x) 3.5in; (2x) 5.25 inch
PSU200/300 W280 W
Weight5.72 kg (12.61 lb)10.00 kg (24.00 lb)
Released20212014
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 7090 SFF and Fujitsu Esprimo P520

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 7090 SFF which was released in 2021. The Fujitsu Esprimo P520 is older and entered production in 2014.

If you are looking for the smaller form factor the Dell OptiPlex 7090 SFF is the right one for you. It is smaller than the Fujitsu Esprimo P520 and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 7090 SFF as it is running a newer generation CPU. This is not to say that Fujitsu Esprimo P520 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (4 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Dell OptiPlex 7090 SFF is using the faster 3200 MT/s RAM. The Fujitsu Esprimo P520 is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex 7090 SFF as it has the ability to run 128 GB of RAM. The Fujitsu Esprimo P520 can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Dell OptiPlex 7090 SFF has 9 USB ports. The Fujitsu Esprimo P520 is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Dell OptiPlex 7090 SFF, is that it has 3 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Fujitsu Esprimo P520 has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Dell OptiPlex 7090 SFF comes with 3 ports, while the Fujitsu Esprimo P520 has only 1. If you are planning to use multiple monitors, the Dell OptiPlex 7090 SFF is the better choice.

The Dell OptiPlex 7090 SFF comes with an HDMI port, while the Fujitsu Esprimo P520 does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Fujitsu Esprimo P520 is better equipped as it comes with 4 SATA slot(s), while the Dell OptiPlex 7090 SFF has 3 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the Dell OptiPlex 7090 SFF. Sadly, the Fujitsu Esprimo P520 has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Fujitsu Esprimo P520 comes with a decent 280 Watt PSU, but the Dell OptiPlex 7090 SFF has a more powerful one rated at 300 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_7090_SFF_motherboard.jpg motherboard layoutFujitsu_Esprimo_P520_motherboard.jpg motherboard layout