Acer Veriton X2665g vs. Dell OptiPlex M 7020 2024
Comparison and Differences
Differences between Acer Veriton X2665g and Dell OptiPlex M 7020 2024
If you are looking for a more modern desktop, then you should go with the Dell OptiPlex M 7020 2024 which was released in 2024. The Acer Veriton X2665g is older and entered production in 2019.
If you are looking for the smaller form factor the Dell OptiPlex M 7020 2024 is the right one for you. It is smaller than the Acer Veriton X2665g and will fit more easily under your desk.
Processor
Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex M 7020 2024 as it is running a newer generation CPU. This is not to say that Acer Veriton X2665g is bad - it can still run some powerful CPUs, albeit being an older generation.
Memory
Both models have have equal amount of ram slots (2 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.
The Dell OptiPlex M 7020 2024 is using the faster 5600 MT/s RAM. The Acer Veriton X2665g is slower by supporting RAM speeds of up to 2666 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex M 7020 2024 as it has the ability to run 64 GB of RAM. The Acer Veriton X2665g can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.
Ports
In total the Acer Veriton X2665g has 8 USB ports. The Dell OptiPlex M 7020 2024 is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. It's great that both of the models have USB 3.1 ports which will allow you to exchange data with your peripherals at up to 10Gb/s. But if you need maximum connectivity, go with the Acer Veriton X2665g as it has 2 USB3.1 ports (the Dell OptiPlex M 7020 2024 has 1).
The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.
In case your monitor supports HDMI only, you will be happy to hear that both models come with an HDMI port.
SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Acer Veriton X2665g is better equipped as it comes with 3 SATA slot(s), while the Dell OptiPlex M 7020 2024 has 0 slot(s).
An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the Dell OptiPlex M 7020 2024 has 1 M.2 slots while the Acer Veriton X2665g comes with just 1.
Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!
Power Supply
Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex M 7020 2024 comes with a decent 90 Watt PSU, but the Acer Veriton X2665g has a more powerful one rated at 180 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.
Motherboard
