Dell OptiPlex Tower Plus 7010 2023 vs. Fujitsu Esprimo G5011

Comparison and Differences

Dell_OptiPlex_Tower_Plus_7010_2023.jpg case front and back pannelFujitsu_Esprimo_G5011.jpg case front and back pannel
Model
Form factorMini TowerMicro
CPU optionsIntel Gen 12&13 i3/i5/i7/i9; Celeron; PentiumIntel Gen10&11 i3/i5/i7
ChipsetQ670H510
Dedicated GPU *GeForce RTX 3070N.A.
RAMDIMM DDR5-3600/4000/4400SODIMM DDR4-3200
RAM slots42
RAM speed4400 MT/s3200 MT/s
RAM max128 GB64 GB
USB ports(4x) USB-A 2.0; (3x) USB-A 3.0; (2x) USB-A 3.1; USB-C 3.2(2x) USB-A 3.0; (3x) USB-A 2.0; (2x) USB-C 3.0 (DP 1.4)
Video ports(3x) Display Port 1.4a;DisplayPort 1.2; HDMI 1.4b; VGA
Other portsRJ45(2.5GHz); Audio; Line-Out/In;RJ45; Headset
Optional portsHDMI 2.0b/Displayport/VGA/PS2/serial/USB Type-C; Serial port; SD-card slotN.A
SATA ports41
PCI slotsPCIe 4.0 x16; PCIe 3.0 x4;PCIe 3.0 x1; PCI-32;N.A.
M.2 slotsM.2 2230/2280 (PCIe 4.0 x4, NVMe); M.2 2230 (WiFi/BT) M.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays(x2) 3.5in; (2x) 2.5in; 5.25in (slim);2.5in
PSU260/500 W65 W
Weight6.52 kg (14.38 lb)0.80 kg (1.76 lb)
Released20232021
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex Tower Plus 7010 2023 and Fujitsu Esprimo G5011

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex Tower Plus 7010 2023 which was released in 2023. The Fujitsu Esprimo G5011 is older and entered production in 2021.

If you are looking for the smaller form factor the Fujitsu Esprimo G5011 is the right one for you. It is smaller than the Dell OptiPlex Tower Plus 7010 2023 and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex Tower Plus 7010 2023 as it is running a newer generation CPU. This is not to say that Fujitsu Esprimo G5011 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Dell OptiPlex Tower Plus 7010 2023 has 4 RAM slots while the Fujitsu Esprimo G5011 has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Dell OptiPlex Tower Plus 7010 2023 is using the faster 4400 MT/s RAM. The Fujitsu Esprimo G5011 is slower by supporting RAM speeds of up to 3200 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex Tower Plus 7010 2023 as it has the ability to run 128 GB of RAM. The Fujitsu Esprimo G5011 can do a bit less at max 64 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Dell OptiPlex Tower Plus 7010 2023 has 10 USB ports. The Fujitsu Esprimo G5011 is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Dell OptiPlex Tower Plus 7010 2023, is that it has 2 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Fujitsu Esprimo G5011 has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Dell OptiPlex Tower Plus 7010 2023 comes with 3 ports, while the Fujitsu Esprimo G5011 has only 1. If you are planning to use multiple monitors, the Dell OptiPlex Tower Plus 7010 2023 is the better choice.

The Fujitsu Esprimo G5011 comes with an HDMI port, while the Dell OptiPlex Tower Plus 7010 2023 does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell OptiPlex Tower Plus 7010 2023 is better equipped as it comes with 4 SATA slot(s), while the Fujitsu Esprimo G5011 has 1 slot(s).

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Fujitsu Esprimo G5011 comes with a decent 65 Watt PSU, but the Dell OptiPlex Tower Plus 7010 2023 has a more powerful one rated at 500 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_Tower_Plus_7010_2023_motherboard.jpg motherboard layoutFujitsu_Esprimo_G5011_motherboard.jpg motherboard layout