Fujitsu Esprimo D538 vs. Fujitsu Esprimo P9910

Comparison and Differences

Fujitsu_Esprimo_D538.jpg case front and back pannelFujitsu_Esprimo_P9910.jpg case front and back pannel
Model
Form factorSmallMini Tower
CPU optionsIntel Gen8&9 i3/i5/i7; Pentium; CeleronIntel Gen10 i3/i5/i7/i9
ChipsetH310Q470
Dedicated GPU *Radeon RX 6400 Low ProfileGeForce GTX 1650 Super
RAMUDIMM DDR4-2666UDIMM DDR4-2933
RAM slots24
RAM speed2666 MT/s2933 MT/s
RAM max32 GB128 GB
USB ports(4x) USB-A 3.0; (4x) USB-A 2.0(2x) USB-A 3.0; (4x) USB-A 2.0; (4x) USB-A 3.1; USB-C 3.1
Video portsDisplayPort 1.2; DVI(2x) DisplayPort 1.2
Other portsRJ45; Headphones; Mic; Line in; Line out; PS/2RJ45; Headset, Line in; Line out
Optional portsVGA; eSATASerial; Parallel; PS/2; VGA; DVI; USB-C 3.1 (DP support 60W/15W)
SATA ports35
PCI slotsPCIe 3.0 x16; PCIe 2.0 x16 (wired x4)PCIe 3.0 x16; PCIe 3.0 x1; PCIe 3.0 x16 (wired x4)
M.2 slotsM.2 2280/2230 M-key (PCIe 2.0 x2, NVMe)(2x) M.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays3.5in; 2.5in; 5.25 inch(3x) 3.5in; 2.5in; (2x) 5.25 inch
PSU210/280 W680 W
Weight5.00 kg (11.03 lb)10.00 kg (24.00 lb)
Released20182020
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Fujitsu Esprimo D538 and Fujitsu Esprimo P9910

If you are looking for a more modern desktop, then you should go with the Fujitsu Esprimo P9910 which was released in 2020. The Fujitsu Esprimo D538 is older and entered production in 2018.

If you are looking for the smaller form factor the Fujitsu Esprimo D538 is the right one for you. It is smaller than the Fujitsu Esprimo P9910 and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Fujitsu Esprimo P9910 as it is running a newer generation CPU. This is not to say that Fujitsu Esprimo D538 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Fujitsu Esprimo P9910 has 4 RAM slots while the Fujitsu Esprimo D538 has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Fujitsu Esprimo P9910 is using the faster 2933 MT/s RAM. The Fujitsu Esprimo D538 is slower by supporting RAM speeds of up to 2666 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Fujitsu Esprimo P9910 as it has the ability to run 128 GB of RAM. The Fujitsu Esprimo D538 can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Fujitsu Esprimo P9910 has 11 USB ports. The Fujitsu Esprimo D538 is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Fujitsu Esprimo P9910, is that it has 5 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Fujitsu Esprimo D538 has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Fujitsu Esprimo P9910 comes with 2 ports, while the Fujitsu Esprimo D538 has only 1. If you are planning to use multiple monitors, the Fujitsu Esprimo P9910 is the better choice.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Fujitsu Esprimo P9910 is better equipped as it comes with 5 SATA slot(s), while the Fujitsu Esprimo D538 has 3 slot(s).

An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the Fujitsu Esprimo P9910 has 1 M.2 slots while the Fujitsu Esprimo D538 comes with just 1.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Fujitsu Esprimo D538 comes with a decent 280 Watt PSU, but the Fujitsu Esprimo P9910 has a more powerful one rated at 680 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Fujitsu_Esprimo_D538_motherboard.jpg motherboard layoutFujitsu_Esprimo_P9910_motherboard.jpg motherboard layout