Dell Inspiron 3891 vs. Fujitsu Esprimo G9012

Comparison and Differences

Dell_Inspiron_3891.jpg case front and back pannelFujitsu_Esprimo_G9012.jpg case front and back pannel
Model
Form factorMini TowerMicro
CPU optionsIntel Gen10&11 i3/i5/i7; Celeron; PentiumIntel Gen12 i3/i5/i7/i9
ChipsetB560Q670
Dedicated GPU *GeForce GTX 1650 SuperN.A.
RAMDIMM DDR4-2666/2933SODIMM DDR4-3200
RAM slots22
RAM speed2933 MT/s3200 MT/s
RAM max64 GB64 GB
USB ports(3x) USB 3.0 Type A; USB 3.0 Type C; (4x) USB-A 2.0;USB-A 3.0; USB-A 2.0; (4x) USB-A 3.1; USB-C 3.1; USB-C 3.2
Video portsHDMI 1.4; DisplayPort 1.4; VGA;DisplayPort 1.4; HDMI 2.1
Other portsRJ45; Headset; Line-Out; Card Reader;RJ45; Headset
Optional portsN.A.HDMI 2.1; DP 1.4a
SATA ports22
PCI slotsPCIe 3.0 x16; PCIe 3.0 x1;PCIe 4.0 x16 (wired x4)
M.2 slotsM.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT); M.2 2280/2230 M-key (PCIe 4.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays3.25in; 9.5mm2.5in; 5.25 inch
PSU260 W90/150 W
Weight6.40 kg (14.11 lb)1.02 kg (2.60 lb)
Released20212022
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell Inspiron 3891 and Fujitsu Esprimo G9012

If you are looking for a more modern desktop, then you should go with the Fujitsu Esprimo G9012 which was released in 2022. The Dell Inspiron 3891 is older and entered production in 2021.

If you are looking for the smaller form factor the Fujitsu Esprimo G9012 is the right one for you. It is smaller than the Dell Inspiron 3891 and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Fujitsu Esprimo G9012 as it is running a newer generation CPU. This is not to say that Dell Inspiron 3891 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (2 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Fujitsu Esprimo G9012 is using the faster 3200 MT/s RAM. The Dell Inspiron 3891 is slower by supporting RAM speeds of up to 2933 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 64 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

Both models have the same amount of USB ports for total count of 8. If this is not enough, using a USB hub is always a viable option. What is nice about the Fujitsu Esprimo G9012, is that it has 5 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Dell Inspiron 3891 has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

In case your monitor supports HDMI only, you will be happy to hear that both models come with an HDMI port.

SATA slots are located on the motherboard and it is where SSD, HDD and Optical Disk Drives are connected. Each of the two models being compared have 2 SATA slot(s). Keep in mind that having too few SATA slots might limit your options for connecting additional memory drives.

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Fujitsu Esprimo G9012 comes with a decent 150 Watt PSU, but the Dell Inspiron 3891 has a more powerful one rated at 260 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_Inspiron_3891_motherboard.jpg motherboard layoutFujitsu_Esprimo_G9012_motherboard.jpg motherboard layout