Fujitsu Esprimo Q558 vs. HP EliteDesk 800 G8 Tower

Comparison and Differences

Fujitsu_Esprimo_Q558.jpg case front and back pannelHP_EliteDesk_800_G8_Tower.jpg case front and back pannel
Model
Form factorMicroMini Tower
CPU optionsIntel Gen8&9 i3/i5/i7; PentiumIntel Gen11 i5/i7/i9;
ChipsetH310Q570
Dedicated GPU *N.A.GeForce RTX 3070
RAMSODIMM DDR4-2666DIMM DDR4-3200
RAM slots24
RAM speed2666 MT/s3200 MT/s
RAM max32 GB128 GB
USB ports(4x) USB-A 3.0; (4x) USB-A 2.0USB-C 3.2; (4x)USB-A 3.1; (3x)USB-A 3.0; (3x)USB-A 2.0;
Video ports(2x) DisplayPort 1.2; DVI(2x) DisplayPort;
Other portsRJ45; Headphones; Mic; Line outRJ45; Hdph; Headset; Line-Out; SD card reader
Optional portsSerial; VGA; (1x) PS/2; USB-C 3.0DP1.4/ HDMI2.0b/ VGA/ USB-C(DP1.4)/ (2x)USB-A 3.0/ LAN/ Thunderbolt3; Serial; PS2
SATA ports24
PCI slotsN.A.PCIe 4.0 x16; (2x) PCIe 3.0 x1; PCIe 3.0 x16 (wired x4);
M.2 slotsM.2 2280/2230 M-key (PCIe 2.0 x2, NVMe); M.2 2230 (WiFi/BT)M.2 2280 M-key (PCIe 3.0 x4); M.2 2280M-key (PCIe 4.0 x4); M.2 2230 (WiFi/BT);
Drive bays(2x) 2.5in; 5.25 inch2.5in; (2x) 3.5in; 5.25in; 9.5mm (slim);
PSU65 W260/550 W
Weight1.60 kg (3.53 lb)9.86 kg (21.74 lb)
Released20182021
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Fujitsu Esprimo Q558 and HP EliteDesk 800 G8 Tower

If you are looking for a more modern desktop, then you should go with the HP EliteDesk 800 G8 Tower which was released in 2021. The Fujitsu Esprimo Q558 is older and entered production in 2018.

If you are looking for the smaller form factor the Fujitsu Esprimo Q558 is the right one for you. It is smaller than the HP EliteDesk 800 G8 Tower and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the HP EliteDesk 800 G8 Tower as it is running a newer generation CPU. This is not to say that Fujitsu Esprimo Q558 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The HP EliteDesk 800 G8 Tower has 4 RAM slots while the Fujitsu Esprimo Q558 has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The HP EliteDesk 800 G8 Tower is using the faster 3200 MT/s RAM. The Fujitsu Esprimo Q558 is slower by supporting RAM speeds of up to 2666 MT/s. Additionally, if you will be needing a lot of RAM, better go for the HP EliteDesk 800 G8 Tower as it has the ability to run 128 GB of RAM. The Fujitsu Esprimo Q558 can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the HP EliteDesk 800 G8 Tower has 11 USB ports. The Fujitsu Esprimo Q558 is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the HP EliteDesk 800 G8 Tower, is that it has 4 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Fujitsu Esprimo Q558 has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the HP EliteDesk 800 G8 Tower is better equipped as it comes with 4 SATA slot(s), while the Fujitsu Esprimo Q558 has 2 slot(s).

An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the HP EliteDesk 800 G8 Tower has 1 M.2 slots while the Fujitsu Esprimo Q558 comes with just 1.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Fujitsu Esprimo Q558 comes with a decent 65 Watt PSU, but the HP EliteDesk 800 G8 Tower has a more powerful one rated at 550 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Fujitsu_Esprimo_Q558_motherboard.jpg motherboard layoutHP_EliteDesk_800_G8_Tower_motherboard.jpg motherboard layout