HP ProDesk 600 G6 Mini vs. Lenovo ThinkCentre M83 Tiny

Comparison and Differences

HP_ProDesk_600_G6_Mini.jpg case front and back pannelLenovo_ThinkCentre_M83_Tiny.jpg case front and back pannel
Model
Form factorMicroMicro
CPU optionsIntel Gen10 i3/i5/i7; Celeron; Pentium;Intel Gen4 i3/i5/i7; Pentium;
ChipsetQ470Q85
Dedicated GPU *N.A.N.A.
RAMSODIMM DDR4-3200SODIMM DDR3-1600
RAM slots22
RAM speed3200 MT/s1600 MT/s
RAM max64 GB32 GB
USB portsUSB-C 3.1; (3x)USB-A 3.1; (3x)USB-A 3.0;(4x)USB-A 3.0; USB-A 2.0;
Video ports(2x) DisplayPort:DisplayPort; VGA;
Other portsRJ45; Headset;RJ45; Headset; Mic;
Optional portsDP1.4/ HDMI2.0a/ VGA/ USB-C(DP1.4)/ Serial/ Thunderbolt3; (2x)USB-A 2.0/Serial; WiFi antenna;DisplayPort; USB-A 2.0; Serial; WiFi antenna;
SATA ports11
PCI slotsN.A.N.A.
M.2 slots(2x) M.2 2280/2230 M-key (PCIe x4); M.2 2230 (WiFi/BT);M.2 2230 (WiFi/BT)
Drive bays2.5in;2.5in;
PSU65/95 W65 W
Weight1.25 kg (2.74 lb)1.3 kg (2.9 lb)
Released20202013
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between HP ProDesk 600 G6 Mini and Lenovo ThinkCentre M83 Tiny

If you are looking for a more modern desktop, then you should go with the HP ProDesk 600 G6 Mini which was released in 2020. The Lenovo ThinkCentre M83 Tiny is older and entered production in 2013.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the HP ProDesk 600 G6 Mini as it is running a newer generation CPU. This is not to say that Lenovo ThinkCentre M83 Tiny is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (2 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The HP ProDesk 600 G6 Mini is using the faster 3200 MT/s RAM. The Lenovo ThinkCentre M83 Tiny is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the HP ProDesk 600 G6 Mini as it has the ability to run 64 GB of RAM. The Lenovo ThinkCentre M83 Tiny can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the HP ProDesk 600 G6 Mini has 7 USB ports. The Lenovo ThinkCentre M83 Tiny is inferior in this regard and packs 5 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the HP ProDesk 600 G6 Mini, is that it has 4 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Lenovo ThinkCentre M83 Tiny has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the HP ProDesk 600 G6 Mini comes with 2 ports, while the Lenovo ThinkCentre M83 Tiny has only 1. If you are planning to use multiple monitors, the HP ProDesk 600 G6 Mini is the better choice.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA slots are located on the motherboard and it is where SSD, HDD and Optical Disk Drives are connected. Each of the two models being compared have 1 SATA slot(s). Keep in mind that having too few SATA slots might limit your options for connecting additional memory drives.

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the HP ProDesk 600 G6 Mini. Sadly, the Lenovo ThinkCentre M83 Tiny has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Lenovo ThinkCentre M83 Tiny comes with a decent 65 Watt PSU, but the HP ProDesk 600 G6 Mini has a more powerful one rated at 95 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

HP_ProDesk_600_G6_Mini_motherboard.jpg motherboard layoutLenovo_ThinkCentre_M83_Tiny_motherboard.jpg motherboard layout