HP ProDesk 400 G1 Mini vs. Lenovo ThinkCentre M600 Tiny

Comparison and Differences

HP_ProDesk_400_G1_Mini.jpg case front and back pannelLenovo_ThinkCentre_M600_Tiny.jpg case front and back pannel
Model
Form factorMicroMicro
CPU optionsIntel Gen4 i3/i5/i7; Celeron; Pentium;Intel Braswell Celeron; Pentium;
ChipsetH81Integrated SoC
Dedicated GPU *N.A.N.A.
RAMSODIMM DDR3-1600 SODIMM DDR3-1600
RAM slots21
RAM speed1600 MT/s1600 MT/s
RAM max16 GB8 GB
USB ports(2x)USB-A 3.0; (4x)USB-A 2.0; (4x)USB-A 3.0; (2x)USB-A 2.0;
Video portsDisplayPort v1.2; VGA;(2x) DisplayPort;
Other portsRJ45; Hdph; Mic;RJ45; Headset; Mic;
Optional portsN.A.VGA/HDMI/DP/Serial; WiFi antenna;
SATA ports11
PCI slotsN.A.N.A.
M.2 slotsM.2 2280 M-key (PCIe); M.2 2230 (WiFi/BT)Optional M.2 2280/2242 M-key (SATA); M.2 2230 (WiFi/BT);
Drive bays2.5in;2.5in;
PSU65 W65 W
Weight1.3 kg (2.9 lb)1.3 kg (2.9 lb)
Released20142015
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between HP ProDesk 400 G1 Mini and Lenovo ThinkCentre M600 Tiny

If you are looking for a more modern desktop, then you should go with the Lenovo ThinkCentre M600 Tiny which was released in 2015. The HP ProDesk 400 G1 Mini is older and entered production in 2014.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Lenovo ThinkCentre M600 Tiny as it is running a newer generation CPU. This is not to say that HP ProDesk 400 G1 Mini is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The HP ProDesk 400 G1 Mini has 2 RAM slots while the Lenovo ThinkCentre M600 Tiny has only 1 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

None of the desktops has an advantage when it comes to the speed of the RAM being used. Both models support RAM speeds of up to 1600. Additionally, if you will be needing a lot of RAM, better go for the HP ProDesk 400 G1 Mini as it has the ability to run 16 GB of RAM. The Lenovo ThinkCentre M600 Tiny can do a bit less at max 8 GB. Most of the times, this should be sufficient for the majority of users.

Ports

Both models have the same amount of USB ports for total count of 6. If this is not enough, using a USB hub is always a viable option. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Lenovo ThinkCentre M600 Tiny comes with 2 ports, while the HP ProDesk 400 G1 Mini has only 1. If you are planning to use multiple monitors, the Lenovo ThinkCentre M600 Tiny is the better choice.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA slots are located on the motherboard and it is where SSD, HDD and Optical Disk Drives are connected. Each of the two models being compared have 1 SATA slot(s). Keep in mind that having too few SATA slots might limit your options for connecting additional memory drives.

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the HP ProDesk 400 G1 Mini. Sadly, the Lenovo ThinkCentre M600 Tiny has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Looking at the Power Supply Unit (PSU) of the two models we don't see any differences. For either of them you get a maximum power of 65 Watts. However be careful, many models have more than one power supply option. When buying your computer, it is a good idea to get a version with the most powerful PSU. This will potentially allow you to upgrade to a more powerful GPU for example.

Motherboard

HP_ProDesk_400_G1_Mini_motherboard.jpg motherboard layoutLenovo_ThinkCentre_M600_Tiny_motherboard.jpg motherboard layout