image of Sabrent Rocket 4 Plus  8TB  M.2 SSD

Sabrent Rocket 4 Plus 8TB

SSD Specification and Info

Sabrent Rocket 4 Plus 8TB is an High-End NVMe SSD produced and sold by Sabrent. The device comes with x4 PCIe 4.0/NVMe interface and M.2 form factor - a good fit for both desktop and laptop computers. This SSD has a maximum sequential read-write speed of up to 7400/6600 MB per second, making it ideal for gaming and workstation PCs.

Sabrent Rocket 4 Plus 8TB is equiped with DRAM memory, and a TLC NAND flash memory with 112 cell layers.


Specification

Model
Interfacex4 PCIe 4.0/NVMe
Form factorM.2
Capacity8TB
ControllerPhison E18
ConfigurationTriple R5 + CoX, 8-ch, 4-CE/ch
DRAMYes
HMBN/A
NAND brandKioxia
NAND typeTLC
Layer112
R/W speed7400/6600 MB/s
TierHigh-End NVMe
Manual

NAND type

Sabrent Rocket 4 Plus 8TB is using a TLC (3 bits per cell) NAND manufacurted by Kioxia with 112 cell layers on top of each other.

The TLC is the most common type of SSD NAND flash memory found on the market at the moment. It is faster, less durable, but still cheaper than the other, more expensive variants - SLC and MLC.

The main advantage of this type of NAND chips is the fact that the cost per gigabyte is much lower, allowing high capacity SSDs at affordable price.

The Controller

Sabrent Rocket 4 Plus 8TB is using Phison E18 SSD controller to connect the NAND memory to the x4 PCIe 4.0/NVMe interface. The controller has Triple R5 + CoX, 8-ch, 4-CE/ch configuration.

Typically, SSD controllers are microprocessors. In this case we have Triple R5 + CoX, 8-ch, 4-CE/ch processor responsible for controlling the SSD in such way, so that the data coming from the interface can be stored on to the NAND flash memory.

Some SSDs have simpler controllers with fewer communication channels and less cores.

Among other things, the controller also manages the SLC caching, optimizing the DRAM cache, encryption, LDPC, garbage collection, wear-leveling as well as TRIM

DRAM Cache

Sabrent Rocket 4 Plus 8TB has a separate DRAM chip to store the SD mapping tables. DRAM cache speeds up the data access significantly compared to the DRAM-less models.

As soon as the OS requests some data from the SSD, the SSD needs to know exactly where it is on the drive. Because garbage collection moves the data constantly, the controller relies on the mapping tables to locate it.

These tables are stored in DRAM cache, where they are accessed much more quickly than in NAND flash.

Therefore, SSDs with DRAM-less architecture have more random write and read operations. This makes the device perform worse and last shorter if they are not HMB enabled.

HMB Support

There is no HMB architecture available on the Sabrent Rocket 4 Plus 8TB to store the mapping tables. The device either doesn't support the architecture or uses DRAM cache.

The HBM is used to reduce the cost of production of NVMe SSDs with DRAM Cache, SSDs with this type of controllers can leverages the host system's DRAM instead of an onboard DRAM chip to host the FTL mapping table used by flash storage.