image of Toshiba Kioxia TR200 2.5

Toshiba Kioxia TR200

SSD Specification and Info

Toshiba Kioxia TR200 is an Entry-Level SATA SSD produced and sold by Toshiba Kioxia. The device comes with SATA/AHCI interface and 2.5" form factor - a good fit for both desktop and laptop computers. This SSD has a maximum sequential read-write speed of up to 555/540 MB per second, making it ideal for gaming and workstation PCs.

Due to its lack of DRAM memory, Toshiba Kioxia TR200 has slight disadvantages over SSDs with DRAM memory. This SSD is using a TLC NAND flash memory with 64 cell layers.


Specification

Model
InterfaceSATA/AHCI
Form factor2.5"
Capacity240GB-960GB
ControllerPhison S11
ConfigurationSingle-core, 2-ch, 8-CE/ch
DRAMNo
HMBN/A
NAND brandKioxia
NAND typeTLC
Layer64
R/W speed555/540 MB/s
TierEntry-Level SATA
ManualToshiba TR200

NAND type

Toshiba Kioxia TR200 is using a TLC (3 bits per cell) NAND manufacurted by Kioxia with 64 cell layers on top of each other.

The TLC is the most common type of SSD NAND flash memory found on the market at the moment. It is faster, less durable, but still cheaper than the other, more expensive variants - SLC and MLC.

The main advantage of this type of NAND chips is the fact that the cost per gigabyte is much lower, allowing high capacity SSDs at affordable price.

The Controller

Toshiba Kioxia TR200 is using Phison S11 SSD controller to connect the NAND memory to the SATA/AHCI interface. The controller has Single-core, 2-ch, 8-CE/ch configuration.

Typically, SSD controllers are microprocessors. In this case we have Single-core, 2-ch, 8-CE/ch processor responsible for controlling the SSD in such way, so that the data coming from the interface can be stored on to the NAND flash memory.

Some SSDs have simpler controllers with fewer communication channels and less cores.

Among other things, the controller also manages the SLC caching, optimizing the DRAM cache, encryption, LDPC, garbage collection, wear-leveling as well as TRIM

DRAM Cache

Toshiba Kioxia TR200 has no separate DRAM chip to store the SD mapping tables to speeds up the data access.

As soon as the OS requests some data from the SSD, the SSD needs to know exactly where it is on the drive. Because garbage collection moves the data constantly, the controller relies on the mapping tables to locate it.

These tables are stored in DRAM cache, where they are accessed much more quickly than in NAND flash.

Therefore, SSDs with DRAM-less architecture have more random write and read operations. This makes the device perform worse and last shorter if they are not HMB enabled.

HMB Support

There is no HMB architecture available on the Toshiba Kioxia TR200 to store the mapping tables. The device either doesn't support the architecture or uses DRAM cache.

The HBM is used to reduce the cost of production of NVMe SSDs with DRAM Cache, SSDs with this type of controllers can leverages the host system's DRAM instead of an onboard DRAM chip to host the FTL mapping table used by flash storage.